Low maintenance wet look floor polish
Easy to use - no burnishing required. Maximum scuff resistance. Low maintenance requirement. •Dries to a wet look gloss. •Protects and prolongs the life of flooring materials.

For all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors. N.B. Not suitable for unsealed wood, unsealed cork or laminated flooring.

Diamond Brite must be applied to a clean dry floor. If required strip old polish with Selate or Selstrip. Apply a thin even film using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). Additional coats enhance the finish. May be readily maintained with Selsheen or Fastlane. Coverage rate: 60 square metres per litre.

Technical

Composition
An advanced blend of styrene/acrylic polymer, wax, wetting agents, film-forming agents and preservative in a water based emulsion form incorporating metal cross linking additives.

Appearance Thin, translucent emulsion
Colour White
Viscosity <10cps
Density 1.039
pH 8.6
Activity 25%
Fragrance Characteristic slightly sweet

Stability
Two years minimum in unopened container

Biodegradability
All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.

Storage Protect from freezing

Flashpoint >100